Tag: History

Wheeled Mk19 Mount

A Ukrainian engineer and fabricator, Іван Савельєв/Ivan Saveliev, has designed and built an interesting wheeled mount for the Mk19 automatic grenade launcher. The mount was recently seen in a video posted to TikTok by a member of 4th Rapid Reaction Rubizh Brigade’s 3rd Battalion Svoboda. The video was posted on the 10 November and shows the mount being demonstrated in camp. There’s a long history of Russian machine guns like the Maxim PM1910, SG-43 and DShK having wheeled mounts or carriages. The new mount for the Mk19 could be seen as a descendent of these.

A Mk19 on the wheeled mount (via social media)

The first MK19 Mod IIIs arrived from the US in late January 2022, as it looked increasingly likely that Russia would invade. Since then they have proliferated and are widely used by the Ukrainian armed forces.

A Mk19 on the mount with wheels removed (via social media)

Saveliev has developed a range of mounts for various support weapons including machine guns, auto-cannons and mortars. He first shared imagery of the wheeled mount for the Mk19 in mid-June posting a photograph showing a Mk19 elevated on one of the mounts. Five months later, on 23 October, Saveliev shared a series of detailed photos of the mount. He noted that the mount could allow the Mk19 to be fired at ‘increased vertical angles’. This is very useful for long range, indirect fire. The M2 heavy machine gun could also be used with the wheeled mount as the mount mimics the mounting points of the M3 tripod, which both the Mk19 and M2 are used with.

Above & Below: Close-ups of the mount (via social media)

The mount has a pair of handles at the muzzle end to allow the weapon to be pulled by two men. The elevation of the Mk19 can be adjusted by an elevation wheel which uses a long threaded bar (or worm pinion/screw) to move the mounting arm forward and back, lowering and raising the weapon. In the video posted by members of the 3rd Battalion Svoboda it is suggested that elevations of 60 or more degrees is possible. Windage can be adjusted by a pair of wheels either side of the rear of the mount.

The mount has a pair of wheels with pneumatic tires which can be removed allowing the weapon to be grounded in the mount. However, this looks to be a fairly unstable firing platform due to the narrow base the mount offers compared to the Mk19’s standard tripod. Despite the Mk19’s relatively low recoil the mount would probably have to be well bedded in to achieve accurate fire and prevent it from potentially toppling. There is no mount for the weapon’s belt box.

According to various comments on Saveliev’s posts about the mount individuals from a number of Ukrainian brigades including the 47th Mechanised and 5th Assault brigades are reportedly interested in the mount.

I haven’t yet been able to find any imagery of the mount being used in the field or of a Mk19 being fired from one so its difficult to know how useful it is in battlefield conditions. The major benefit, however, is increasing the Mk19’s portability. Weighing in at 77.6 lbs (35.2 kg) the Mk19 (without the M3 tripod which adds 44 lbs (20 kg)) is heavier than its Russian counter-part, the AGS-17. This makes moving it across broken terrain a difficult task, the wheels might help

Special thanks to Weapons Illustrated who has been tracking this mount and assisted with this video/article.

Support Us: If you enjoyed this video and article please consider supporting our work here. We have some great perks available for Patreon Supporters – including early access to custom stickers and early access to videos! Thank you for your support!

French Rifles for Ukraine

On 6 November, the French arms manufacturer Verney-Carron, through its defence brand Lebel, announced the signing of a framework contract with Ukrspecexport, a Ukrainian state-owned arms trading company which is part of Ukroboronprom. The contract covers the production of a substantial number of small arms including carbines, precision rifles and 40mm grenade launchers.

VDC15 (Lebel)

The contract is worth 36 million Euros ($38.5 million) and includes 10,000 assault rifles, 2,000 precision rifles and 400 grenade launchers. The contract will need to be funded from Ukrainian and French sources with initial delivery scheduled for early 2024, with delivery to be spread over the next 10 months. The announcement makes no mention of spare parts or support as part of the contract.

The contract will likely see the delivery of Verney-Carron’s VCD15, an AR-15 pattern rifle available in various configurations but chambered in 5.56x45mm or .300 BLK and based on Stoner’s internal gas system. The 2,000 precision rifles are probably Lebel’s VCD10, which was introduced in 2018 and is a precision AR-10 pattern rifle chambered in 7.62x51mm or .260 Remington. The 400 grenade launchers will likely be the compact LP40, a 40x46mm standalone launcher, which weighs 1.3kg, has a removable stock and a folding front pistol grip.

LP40 (Lebel)

It’s unclear which branch of the Ukrainian Armed forces the small arms will be destined for but they represent a substantial number, enough to equip a brigade or two. In terms of aid France has already provided a wide range of weapon systems and military equipment including self-propelled artillery, armoured personnel carriers, mines, anti-tank guided missiles, small arms, hand grenades and air defence systems. 

Support Us: If you enjoyed this video and article please consider supporting our work here. We have some great perks available for Patreon Supporters – including early access to custom stickers and early access to videos! Thank you for your support!

More Russian & Ukrainian MT-LB Adaptations

In June we looked at MT-LB adaptations which have been pressed into service by both sides. Check out that video/article here. In recent weeks there have been more sightings of some of these adapted vehicles.

On 3 September, the first video of one of Russia’s MT-LBs fitted with a 2M-3 twin 25mm naval gun turret was shared online. The turret appears to be extremely unstable, shaking violently, its hard to imagine this weapon system being useful for anything beyond suppression.

A Russian MT-LB mounted with a 2M-3 turret (via IZ)

A week later on 10 September a short clip of another Russian MT-LB with a 2M-3 turret was published by Russian news outlet Izvestia. Again the turret seen firing appears to be very unstable with not only the vehicle rocking on its suspension but also the turret bouncing in its mount.

Intriguingly both of these MT-LBs appear to have the 2M-3 turrets mounted much lower than the vehicles seen earlier. The MT-LBs seen earlier appear to have the turrets mounted higher in tower-like structures.

An S-60 MT-LB during an exercise in Russia (via social media)

Another adaptation not covered in our earlier video/article is the mounting of 57mm S-60 anti-aircraft guns on MT-LBs. These have been seen somewhat regularly and most recently shared via Russian telegram channels shared video of S-60-armed MT-LB training with a newly mobilised, but unnamed, unit in Russia’s central military district. These vehicles typically provide direct fire support against ground targets.

An MT-LBu fitted with a 14.5mm KPVT in a RWS (via 42nd Separate Mechanised Brigade)

In terms of Ukrainian adaptations there have been further sightings of one of the vehicles we looked at last time, an MT-LBu variant which has been upgraded with additional armour and a remote weapon station mounting a 14.5mm KPVT heavy machine gun. These are believed to be in service with the 42nd Separate Mechanised Brigade and some sources have described them using the designation BMP-1LB.

A video showing several of the adapted MT-LBus was shared on 7 September, showing four of the vehicles. On 13 September the 42nd Separate Mechanised Brigade shared a series of photographs featuring the vehicles. There hasn’t yet been any video of these vehicle’s remote weapon stations being fired so it is unclear if they have been stabilised better than their Russian counterparts.

MT-LB with a BM-7 Parus turret (via social media)

One adaptation which was not mentioned in our earlier video/article was the combining of an MT-LB with a BM-7 ‘Parus’ weapon module. The BM-7 normally comprises a 30mm ZTM-1 auto cannon, a coaxial PKT machine gun, a 30mm automatic grenade launcher and several anti-tank guided missiles. These are typically paired with the BTR-4. MT-LBs mounted with the BM-7 don’t appear to have the ATGMs fitted. These MT-LBs were first seen in July, with a video of two of the vehicles on the move shared on 21 July. Another video showing one of the vehicles firing has also been shared.

The ubiquitous MT-LB, while lightly armoured, continues to offer one of the best available platforms adaptation, if you enjoyed this article/video – check out our earlier work on MT-LB adaptations here.

Update 11/7/24:

Russian marines of the 155th Guards Brigade operate an MT-LB with a 2M-3M twin mount.

Support Us: If you enjoyed this video and article please consider supporting our work here. We have some great perks available for Patreon Supporters – including early access to custom stickers and early access to videos! Thank you for your support!

Does the L403A1 Mount a Bayonet?

In a recent article/video we looked at the UK’s newly selected Alternative Individual Weapon system, the L403A1. The Knight’s Armament KS-1 was selected as the new rifle for the Ranger Regiments of the Army Special Operations Brigade and for elements of the Royal Marines Commandos.

One question which frequently appeared in the comments was “can it fit a bayonet?” This is a good question because the British Army is known to be a proponent of bayonet use with a long history of using it to great effect from the 1600s right through to recent conflicts in Iraq and Afghanistan.

Surveillance and Reconnaissance Squadron member with new L403A1 (Royal Marines Commandos)

The short answer to the question is – yes. The longer answer is a bit more complex. Just a week after the selection of the new rifle was announced Knights Armament displayed one of the rifles with a bayonet fixed at the DSEI 2023 exposition in London. This naturally caught some attention.

L403A1/KS-1 with a bayonet seen as DSEI 2023 (via social media)

However, when the selection of the L403A1 was initially announced a breakdown of the Alternative Individual Weapon system’s accessories and ancillaries was released. This included: a Vortex 1-10x LVPO, an Aimpoint ACRO and a QDC/MCQ-PRT [Quick Detach Coupling/Mini Close Quarters–Pressure Reduction Technology] suppressor along with a sling, a vertical front grip, and a Surefire weapon light but noticeably it did not include a bayonet.

Breakdown of the parts and accessories adopted with the L403A1 (Edgar Brothers)

The ability to fix a bayonet was not part of the weapon’s original requirements and it was not stipulated by the Rangers or Commandos. Instead, Knight’s Armament developed the capability themselves, perhaps recognising the UK’s fondness for the bayonet and the British Army’s long history of its use as both a training aid and as a weapon of war.

KAC’s 1st bayonet design with QDC attachment mechanism (courtesy of Gregory Knowles)

TAB reached out to Knight’s Armament about the bayonet and they confirmed that “the bayonet was designed in anticipation of a potential need, though not required as part of the contract.” The bayonet seen fixed to the rifle at DSEI was apparently the first iteration of the design which according to Knight’s Armament “used the same mounting mechanism as the suppressors” but a new “revised design uses an attachment mechanism that is more similar to the SA-80 bayonet attachment/retention design.”

Essentially, rather than using the suppressor’s ‘Quick Detach Coupling’ system the newer iteration of the bayonet uses a pivoting catch. The quick-detach method used by the suppressor involves the suppressor being rolled one way until the index pin seats in a notch before tightening it by twisting it the other direction.

Photos of 2nd bayonet design (Knight’s Armament Company)

The new iteration of the bayonet fits over the rifle’s 3-prong QDC muzzle device and uses the same style of catch system as the SA80. Knight’s Armament explained that “the redesign was a refinement of an initial concept after some basic testing and feasibility evaluation.” The bayonet haven’t undergone any serious testing as they’re still in the development phase. A chromed version of the latest iteration of the bayonet was also displayed at DSEI and has a removable pommel piece that can act as a small storage space and makes the bayonet more comfortable for use as a knife.

The bayonet’s blade is offset to the left side with a corresponding hole which lines up with the muzzle.

While bayonets aren’t currently planned to be issued with the rifles, the requirement might develop once they enter service. If, in the future, the UK Ministry of Defence requested a bayonet for the new rifles it seems that Knight’s Armament could be able to oblige.

FN Light Automatic Rifle ‘Competition Model’ Manual

In this short video we’ll take a look at a manual for the FN Light Automatic Rifle ‘Competition Model’. The FN LAR was a semi-automatic only commercial export variant of the FAL. This undated manual likely dates from the 1980s when FN began importing LAR’s into the US.

This week is FAL week over at History of Weapons & Warfare, with videos looking at the FAL from all of the creators being featured. Until Sunday, 8 October, you can get 25% off your first month when you use the discount code ‘L1A1‘! Head over and check out – www.weaponsandwar.tv

Front cover of the LAR manual (Matthew Moss)
Centre-fold of the LAR manual showing the disassembly process (Matthew Moss)

More Manuals from the TAB Reference Collection:

Support Us: If you enjoyed this video and article please consider supporting our work here. We have some great perks available for Patreon Supporters – including early access to custom stickers and early access to videos! Thank you for your support!

Heavy Drone Bombers Dropping Anti-Tank Mines

Drone warfare in Ukraine is one of the war’s most rapidly evolving elements with considerable innovation and improvisation. In recent weeks several videos have been shared showing large drones dropping TM-62 anti-tank mines.

The first video shared on 3 September showed how a mine could be carried and released by a large six-rotor drone. The TM-62M is seen loaded into a cradle tray which is then remotely triggered causing the floor plate to hinge and release the mine. The video also shows how the TM-62 is fuzed with a UZRG-pattern hand grenade fuze, pushed directly into the mine’s explosive through a hole cut in the side of its casing.

The TM-62M is a high-explosive blast landmine designed to immobilise or destroy vehicles. The mine is packed with 7.5kg (17lbs) of explosive and is normally centrally fuzed by a pressure fuze. The TM-62M is a significant payload for a bomber drone and when dropped they have significant blast effect.

A subsequent video, shared on 6 September, shows a series of clips filmed by the bomber drone’s camera showing the TM-62 being dropped on numerous targets. The mines in this video have been significantly adapted with a stabilising tail added. The tail appears to be made up of a length of PVC pipe and a large water battle with its base cut off. The tail appears to be quite effective especially given the mine’s considerable weight and poor aerodynamics. It is also notable that the fuzing system appears to be different in the second video. Rather than a hand grenade fuze it appears that a larger fuze has been used, positioned next to the stabilising tail.

With the tail and its cut down water bottle its unlikely the release system for this munition is the same as that seen in the first video. A system which would allow for a smooth release and not snag the tail assembly would be needed. In several of the clips in the second video a strap swings past the drone’s camera perhaps suggesting there is a sling system in use.

A subsequent photograph shared on social media shows one of the mines in much better resolution. The tail is indeed made from PVC piping and a water bottle and the fuze appears to be vane-armed. The makers also have a sense of humour likening the odd-looking munition to the ‘USS Enterprise’ from Star Trek, they’ve written ‘USS Enterprise NCC-0001’ on the forward section of the mine.

At the same time as the photograph a number of additional videos showing the TM-62 based bombs being dropped were shared. These videos were originally shared towards the end of August and show a series of successful munition drops.

We are seeing a trend towards more sophisticated and more capable drone bombers which can carry either greater numbers of smaller bombs or larger singular bombs like the TM-62 munition.

Update – 1/10/23

The K-2 drone team with the 54th Brigade has shared footage of one of their drones dropping TM-62s mines on a Russian checkpoint and storage position. The drone appears to drop several unadapted TM-62s, though the lag time between landing and detonation would indicate they are not equipped with an impact fuze but perhaps a grenade fuze as seen in the initial videos featuring TM-62s. The resolution of the thermal cameras does not make it possible to identify the method of fuzing.

Note the falling TM-62 (with tape) and the swinging drop tray (K-2)

The release system appears to consist of a tray which holds the mine which is suspended by straps which are released to drop the munition. The tray can be seen swinging beneath the drone after one of the drops. The munitions appear to have tape around them, the reason for this is unclear, perhaps protecting the fuze system.

Update – 5/1/24: A video compilation showing numerous drops of TM-62s was shared on 5 January 2024. It begins with a demonstration of a light weight drop tray being released. The tray appears to be made from a metal grill (perhaps from an oven or an animal cage). The compilation shows mines being dropped without tail assemblies like those seen in earlier videos. Their are also visible puffs of gases/smoke from the mine’s fuze being triggered as it descends.

Update – 11/1/24:

Update -17/1/24: Further footage of TM-62 pattern mines being dropped from drones. Note a tail stabiliser is not used.

Support Us: If you enjoyed this video and article please consider supporting our work here. We have some great perks available for Patreon Supporters – including early access to custom stickers and early access to videos! Thank you for your support!

Bibliography:

TM-62M Landmine, CAT-UXO, (source)

Fuzes, CAT-UXO, (source)

BAS-80: Russia’s Switchblade Loitering Munition

Reports from Russian media outlets announced on 18 September, that Android Technics/Technology, a Russian technology company, had developed an analogue of AeroVironment’s Switchblade 300 loitering munition. Imagery and footage of the BAS-80 was shared by Russian state news outlet RIA.

Android Technology’s Managing Director, Evgeny Dudorov, told RIA that they had provided a ‘couple’ of the loitering munitions to a volunteer unit, the Tsar’s Wolves, which reportedly provides military-technical assistance to Separatist units. Dudorov hopes that the unit will “find the best ways” to use the new kamikaze drone. Back in April, the development of the BAS-80 was first reported when Android Technology stated that the munitions would be mounted on the Marker armed unmanned ground vehicle.

BAS-80 (via RIA)

Russia has had considerable success in the field with its larger, heavier Lancet loitering munitions developed by ZALA Aero Group which is a part of Kalashnikov Concern. The most advanced variants of Lancet boast a 11lb/5kg payload. The Ukrainian’s, however, have demonstrated an edge when utilising smaller FPV kamikaze drones. These FPV drones appear to be favoured over the Switchblade 300.

The BAS-80 bares more than a passing resemblance to the US-manufactured Switchblade which the US has provided to Ukraine in moderate numbers since March 2022. Utilising the same folding wing configuration and man-portable tube-launch system.

Dudorov stated that the BAS-80 is made from carbon fiber, weighs in at 3.7lb/1.7kg and has a maximum flight speed of up to 80mph/130kph. He also claimed that it can travel up to 18.6 miles/30km and carries a 1.1lb/500g payload – which may suggest that its intended for anti-personnel and anti-materiel use, like the Switchblade. This would made the BAS-80 0.6lb/300g lighter than the Switchblade 300 and have 12.5 miles/20km more range. Photographs of the munition show that it uses a pusher propeller configuration and has three forward-facing optical lens for guidance.

A Switchblade 300 in the field in Ukraine, 2022 (via social media)

It remains unclear if the Russian munition was developed using technology found in captured Switchblade 300s. Other analogues of the Switchblade have been developed by both China and Iran. China unveiled the FH-901 loitering munition in September 2022 and Iran introduced the Meraj-521 in October 2022. Both systems appear to be externally different in size and shape to that of the BAS-80, with the Chinese munition larger (more analogous with the Switchblade 600) and the Iranian drones launching from a rectangular box. The BAS-80 launches from a cylindrical tube more akin to the Switchblade.

The BAS-80’s guidance systems, software and internals remain unknown and from Russian reports it is still some way from mass production with development to be finalised following trials in the field.

This article was adapted from one originally published at OvertDefense.com

Support Us: If you enjoyed this video and article please consider supporting our work here. We have some great perks available for Patreon Supporters – including early access to custom stickers and early access to videos! Thank you for your support!

Bibliography:

BAS-80, RIA, (source)

China unveils its version of Switchblade suicide drone, Global Times, (source)

US Switchblade Drone ‘Knock Off’ Meraj-521 Unveiled By Iran, Eurasian Times, (source)

Armourer’s Bench on the New History of Weapons & War App!

We are excited to announce that TAB will be joining the new video app History of Weapons & War, launched by our friend Ian of Forgotten Weapons. We were flattered to be amongst the first group of channels to be asked to join the app.

We’re really pleased to be joining our friends at Bloke on the Range, British Muzzleloaders, the Royal Armouries, Cap & Ball EU, Legacy Collectibles, Nine Hole Reviews and of course Forgotten Weapons!

All of these channels approach military and gun history in their own fantastic, unique ways so there is a vast plethora of cool and interesting content on the app from the beginning. There are currently around 5,000 videos on the app and counting.

The app is available on various platforms including tvOS (aka Apple TV), iOS (aka Apple App Store), Android TV, Android App Store, Roku, and Amazon Fire TV. The best place to sign up is directly at weaponsandwar.tv and sign up there, then download the app on your platform of choice!

Here’s Ian’s video explaining everything!

A History of Weapons & War subscription is $9.99 a month, or around $99.99 a year.

So head to weaponsandwar.tv, check out the site/app and sign up!

Gulf War Homemade SA80 / L85A1 Front Grip

There is a rich history of attaching home-made, ad-hoc forward grips to weapons within the British military. In the 1940s troops fashioned home-made forward grips for Sten machine carbines while in the 1960s at least one member of the SAS operating in Borneo during the Indonesian Confrontation attached a carved wooden foregrip to his M16. In the 1980s the operators with the SAS’ counter-terrorism teams attached L1A1 SLR pistols grips to their MP5s.

British troops in Northern Ireland with L1A1s fitted with makeshift front grips made using a spare pistol grip attached with a jubilee clip

The intermittent tradition appears to have continued into the early 1990s with one member of the Staffordshire Regiment seen to have mounted a pistol grip to the forend of his L85A1. The soldier and his adapted rifle appeared in a number of photographs and some footage taken during a field exercises in Saudi Arabia.

Commandos on parade with STEN MkIIs equipped with ad-hoc front grip, at Kabrit in June 1943 (IWM A17755)

The battalion deployed to Saudi Arabia as part of 7th Armoured Brigade in October 1990, as part of Operation Granby. During the phase of operations in the Gulf which the US designated Operation Desert Shield allied forces prepared to liberate Kuwait and took part in a number of field exercises.

On 10 November, 1990 Sgt. Dave Miles, a British Army photographer filmed up-close footage of C Company, 1st Battalion during a live fire exercise. During one brief section of the footage the L85A1 with foregrip can be seen firing. On 6 January 1991, C Company took part in another live fire exercise which again saw them filmed and the same rifle features in several brief sections. It also appears in photographs taken by AP photographers Patrick Baz and Sadayuki Mikami, an unnamed British Army photographer and US Army photographer PFC John F. Freund.

Company C, 1st Battalion, The Staffordshire Regiment, during a live fire training exercise assaulting a mock village and trench complex, 6 January 1991. (XVIII Airborne Corps History Office photograph by PFC John F. Freund)

Unlike some of the earlier examples of wooden ad-hoc foregrips this one appears to be fashioned from a spare SA80 pistol grip attached to the rifle’s plastic forend by a bolt. While mods like this one weren’t that uncommon they are rarely so well documented in photographs and videos. It’s also interesting to see just how common painting weapons was.

Royal Marines Commandos in Afghanistan c.2006. An LSW rear grip fitted as an ad-hoc foregrip (Commando: On the Front Line)

Similar modifications were made using the rear grip from the L86A1 Light Support Weapon. These were again bolted through the vents in the underside of the rifle’s plastic handguard. One of these modifications was seen a number of times in the hand of a member of the Royal Marines Commandos during the 2007 documentary Commando: On the Front Line.

Generally the addition of foregrips make for handier, more pointable weapons. Arguably, the soldier from C company was ahead of his time as later, following the L85A2 refits and the Afghanistan urgent operational requirements, Grip Pod vertical front grips were paired with the rifles.

If you enjoyed this video and article please consider supporting our work here. We have some great perks available for Patreon Supporters. You can also support us via one-time donations here. Thank you for your support!

Project Hunter: The UK’s New Assault Rifle

The United Kingdom has announced the selection of the Knight’s Armament Company KS-1 as the new individual weapon for the new Ranger battalions and the Royal Marines Commandos. The requirement for the new rifle was released back in August 2021, and called for the “procurement and support of an Armalite Rifle (AR) platform Alternative Individual Weapon (AIW) System.”

The requirement called for a ‘Rifle System’ which comprises the weapon and a ‘Signature Reduction System’ [suppressor] and an ‘Optic System’. The rifle itself had to be ‘gas operated with a rotating, locking bolt’ and was to specifically have “a standard configuration, not bullpup, with the magwell in-front of the trigger housing.”

Royal Marines Commando with L403A1 (Royal Marines/Royal Navy)

The UK launched Project Hunter to select a new Alternative Individual Weapon (AIW) to replace the SA80/L85 series of rifles and Colt Canada L119s in service with the Rangers and elements of the Royal Marines Commandos. After two years of competition the UK MoD has announced that Knight’s KS-1 has been selected as the L403A1, beating off reported competition from Heckler & Koch, SIG Sauer, Daniel Defense and Glock.

Other weapons believed to have been evaluated include the HK416A5, the SIG Sauer SPEAR-LT, the Daniel Defense M4 and Glock’s GR-115F. Other companies believed to have submitted rifles include Colt Canada, Lantac, Haenel and Steyr amongst others.

The new rifles will supplement the L85A2 and L85A3 which currently equip the majority of the UK armed forces. The rifles will be procured via UK-based company Edgar Brothers and the £90 million ($110 million) contract will see up to 10,000 new rifles delivered over the next decade. An initial £15 million order for 1,620 AIW systems has been placed with the British Army fielding them with the Army Special Operations Brigade, with the brigade expected to receive the first rifles by the end of 2023. The Royal Marines’ ‘strike companies’ and Surveillance and Reconnaissance Squadron will also be among the first to receive the L403A1. The ‘Alternative Individual Weapon’ essentially fulfils the same role every AR-pattern rifle in UK service has since the 1960s.

New Alternative Individual Weapon – L403A1 (UK MoD)

The UK’s Minister for Defence Procurement, James Cartlidge said:

“This is another example of how we are committed to investing in the most advanced battlefield equipment to back our troops on the battlefield. This advanced rifle’s ability to help soldiers maintain the stealth edge not only protects them but delivers war-fighting advantage over our adversaries.”

Interestingly, the UK Ministry of Defence’s press release emphasises that as an AR-pattern rifle the L403A1 “shares much in common with the rifle systems used by many of the UK’s allies. Given their specialist role, and the critical task of working with and alongside many of the UK’s allies, the platform will enable ASOB to share skills and drills in an efficient manner.”

Close up of the Vortex and Aimpoint optics which make up part of the AIW package (Royal Marines/Royal Navy)

So what does the Alternative Individual Weapon (AIW) system include?

The system builds around the Knight’s KS-1 but also includes a magnified 1-10 LPVO optic from Vortex, an Aimpoint ACRO P-2 red dot and the Knight’s QDC/MCQ-PRT suppressor.  The prime contractor for the project, Edgar Brothers, are responsible for the sourcing and assembly of the AIW’s accessories. Accessories for the rifle will include a MAGPUL M54 sling, a Surefire Mini Scout Light Pro, G10 rail scales and a MAGPUL M-LOK AFG.

Anatomy of the L403A1 (Edgar Brothers)

The KS-1 is the latest iteration of the SR-16 series, it has a 13.7in (35cm) barrel and weighs 6.88lbs (3.1kg) unloaded, its overall length is 32.2in (82cm) with the stock collapsed and 34.2in (87cm) extended. The QDC/MCQ-PRT weighs an additional 13.9oz and adds just over 2 inches to the weapon’s length. The rifle uses a direct gas impingement system (or more correctly described as Stoner’s internal piston system).

The selection of the new rifle forms part of the Royal Marines’ larger modernization push under the Commando Force Programme alongside a new helmet from Gentex and Fused Binocular Night Vision devices from L3Harris.

Surveillance and Reconnaissance Squadron member with L403A1 in Norway (Royal Marines/Royal Navy)

We got our first indication of the KS-1’s selection in June, when the Royal Marines published a new recruitment advert featuring the rifle. It was also subsequently seen during a demonstration at Lulworth Ranges in July.

While the British military have used AR-pattern rifles since the 1960s in various roles, Project Hunter and the Alternative Individual Weapon represents a major procurement and it remains to be seen how it will influence Project Grayburn – the effort to select a replacement for more than 150,000 SA80s.

Support Us: If you enjoyed this video and article please consider supporting our work here. We have some great perks available for Patreon Supporters – including early access to custom stickers and early access to videos! Thank you for your support!

Bibliography:

Alternative Individual Weapon (AIW) System Tender Aug. 2021, UK Govt. (source)

£90 million contract equips Armed Forces with advanced new rifle, UK MoD (source)

Britain’s Commandos to get new assault rifles, Royal Navy (source)

Knight’s KS-1, Knight’s Armament Company, (source)

UK Selects New Assault Rifle, Overt Defense, (source) [This article is adapted from this original article]