Category: Video

SAS Browning Hi-Power Extended Magazines

On the 5th May 1980, the world was spectacularly introduced to the Special Air Service and their Browning Hi-Power’s with extended magazines.

22 SAS formed the Counter-Revolutionary Warfare Wing in the 1970s, after the 1972 Munich Massacre, and quickly took a lead in developing counter-terrorism tactics. They gained worldwide notoriety in 1980, during Operation Nimrod, the assault ended the Iranian Embassy Siege. It was during Nimrod that the SAS’ CRW squadron was seen in action for the first time.

I began to notice the extended Hi-Power magazines while examining photographs from the operation for another upcoming video. As I looked closely I began to notice more and more holstered Browning Hi-Powers with extended magazines. The Hi-Power’s standard double-stack, single-feed magazine holds 13 rounds, decent for the period, however, SAS troopers evidently saw the benefit of having more ammunition ready to go on their secondary weapon.

Members of B Squadron’s Red Team prepare to rappel and breach the rear of the embassy (via Woolley & Wallis)

The best photographs are of part of Red Team as they breach the rear balcony of the embassy. In the first photograph a four man team prepare to rappel/abseil down the rear of the embassy to enter via the balcony. You can see the trooper with his back to the camera about to rappel has a Hi-Power with an extended magazine. Subsequent photographs of the four man team on the rear balcony show that several of the troopers have extended magazines. In another photograph Rusty Firmin and a breech team with Blue Team enter the rear of the embassy at the ground floor. On his right leg Firmin is carrying a Browning Hi-Power with an extended magazine.

The last photograph shows members of the SAS in the garden behind the embassy securing the hostages so they can be safely identified. As one of the troopers is zip-tying a man he has laid his Hi-Power on the grass next to him.

SAS troopers secure hostages for IDing, note the pistol and extended magazine on the left (via Woolley & Wallis)

The British Army adopted the Hi-Power in 1954, it remained in service through to 2013. It was the SAS’ primary sidearm until the SIG Sauer P226 gained favour in the early 1990s. As seen in the photographs from the Iranian Embassy Siege the CRW squadron carrier their Hi-Powers in custom-made leather drop leg holsters which were made by Len Dixon and Paul Evers.

The extended magazines can be seen in photographs dating from throughout the 1980s. Theundated photograph below shows an SAS team during training to assault a train carriage, the trooper in the centre has a Hi-Power with an extended magazine. A photograph of Princess Diana during a visit to Hereford in 1983, features an SAS trooper with an extended magazine visible. This undated photograph, probably from the mid-1980s, of a trooper kicking in a door during training also features one of the magazines. A similar training photograph shows a 4-man team stacking up for an entry – the lead trooper has a Hi-Power loaded with an extended magazine.

SAS team during training to assault a train carriage, note the extended magazine in the central trooper’s Hi-Power and the DIY vertical front grip on the right

Initially, I was unsure who manufactured the extended magazines used by the SAS as very little has previously been written about them and the resolution of the available imagery makes identifying them difficult. A look through contemporary issues of Soldier of Fortune magazine shows a quite few variations were available. With manufacturers like Mec-Gar, SILE and Pachmayr all producing variations though they may also have been offered by FN themselves. However, according to a member of the SAS active in the 1970s and early 1980s the magazines were made in-house by the Regiment’s armourers. They apparently worked well. Judging from the imagery available the magazines probably held between 20 and 25 rounds, with the lower end of the scale more likely.

I spoke to Robert Lancaster, another member of the SAS who served in the 1980s, who explained:

“I nearly always used a 20 round mag unless I was doing door entry, when you had a slung Remington [870] and the 5 [MP5], in that case I used the standard mag in case the mag got caught on the shotty!”

A wrist magazine holder seen in a 1984 British Army film about the SAS (British Army/SSVC via IWM)

One other notable thing to point out are the wrist magazine holders used by some members of the assault teams. This is essentially a ready-to-go magazine attached to the operator’s pistol arm. This would in theory allow the operator to execute a faster reload, the idea being that taking the fresh magazine from the wrist, nearer to the pistol, rather than from the holster pouches on the thigh .

We get a good look at one of these in the British Army’s 1984 video about the SAS. We can see the magazine holder on the operator’s left wrist. Later in the film a trooper climbing through a window can also be clearly seen equipped with a Browning Hi-Power loaded with an extended magazine. The tradition continued with extended magazines also being regularly used with the later SIG P226s.

Special thanks to British SAS Photos on Instagram for their help and to Robert Lancaster for answering my questions. We’ll have more articles/videos looking at SAS weapon set ups from this period in the future so stay tuned.

Support Us: If you enjoyed this video and article please consider supporting our work here. We have some great perks available for Patreon Supporters – including early access to custom stickers and early access to videos! Thank you for your support!

Wheeled Mk19 Mount

A Ukrainian engineer and fabricator, Іван Савельєв/Ivan Saveliev, has designed and built an interesting wheeled mount for the Mk19 automatic grenade launcher. The mount was recently seen in a video posted to TikTok by a member of 4th Rapid Reaction Rubizh Brigade’s 3rd Battalion Svoboda. The video was posted on the 10 November and shows the mount being demonstrated in camp. There’s a long history of Russian machine guns like the Maxim PM1910, SG-43 and DShK having wheeled mounts or carriages. The new mount for the Mk19 could be seen as a descendent of these.

A Mk19 on the wheeled mount (via social media)

The first MK19 Mod IIIs arrived from the US in late January 2022, as it looked increasingly likely that Russia would invade. Since then they have proliferated and are widely used by the Ukrainian armed forces.

A Mk19 on the mount with wheels removed (via social media)

Saveliev has developed a range of mounts for various support weapons including machine guns, auto-cannons and mortars. He first shared imagery of the wheeled mount for the Mk19 in mid-June posting a photograph showing a Mk19 elevated on one of the mounts. Five months later, on 23 October, Saveliev shared a series of detailed photos of the mount. He noted that the mount could allow the Mk19 to be fired at ‘increased vertical angles’. This is very useful for long range, indirect fire. The M2 heavy machine gun could also be used with the wheeled mount as the mount mimics the mounting points of the M3 tripod, which both the Mk19 and M2 are used with.

Above & Below: Close-ups of the mount (via social media)

The mount has a pair of handles at the muzzle end to allow the weapon to be pulled by two men. The elevation of the Mk19 can be adjusted by an elevation wheel which uses a long threaded bar (or worm pinion/screw) to move the mounting arm forward and back, lowering and raising the weapon. In the video posted by members of the 3rd Battalion Svoboda it is suggested that elevations of 60 or more degrees is possible. Windage can be adjusted by a pair of wheels either side of the rear of the mount.

The mount has a pair of wheels with pneumatic tires which can be removed allowing the weapon to be grounded in the mount. However, this looks to be a fairly unstable firing platform due to the narrow base the mount offers compared to the Mk19’s standard tripod. Despite the Mk19’s relatively low recoil the mount would probably have to be well bedded in to achieve accurate fire and prevent it from potentially toppling. There is no mount for the weapon’s belt box.

According to various comments on Saveliev’s posts about the mount individuals from a number of Ukrainian brigades including the 47th Mechanised and 5th Assault brigades are reportedly interested in the mount.

I haven’t yet been able to find any imagery of the mount being used in the field or of a Mk19 being fired from one so its difficult to know how useful it is in battlefield conditions. The major benefit, however, is increasing the Mk19’s portability. Weighing in at 77.6 lbs (35.2 kg) the Mk19 (without the M3 tripod which adds 44 lbs (20 kg)) is heavier than its Russian counter-part, the AGS-17. This makes moving it across broken terrain a difficult task, the wheels might help

Special thanks to Weapons Illustrated who has been tracking this mount and assisted with this video/article.

Support Us: If you enjoyed this video and article please consider supporting our work here. We have some great perks available for Patreon Supporters – including early access to custom stickers and early access to videos! Thank you for your support!

French Rifles for Ukraine

On 6 November, the French arms manufacturer Verney-Carron, through its defence brand Lebel, announced the signing of a framework contract with Ukrspecexport, a Ukrainian state-owned arms trading company which is part of Ukroboronprom. The contract covers the production of a substantial number of small arms including carbines, precision rifles and 40mm grenade launchers.

VDC15 (Lebel)

The contract is worth 36 million Euros ($38.5 million) and includes 10,000 assault rifles, 2,000 precision rifles and 400 grenade launchers. The contract will need to be funded from Ukrainian and French sources with initial delivery scheduled for early 2024, with delivery to be spread over the next 10 months. The announcement makes no mention of spare parts or support as part of the contract.

The contract will likely see the delivery of Verney-Carron’s VCD15, an AR-15 pattern rifle available in various configurations but chambered in 5.56x45mm or .300 BLK and based on Stoner’s internal gas system. The 2,000 precision rifles are probably Lebel’s VCD10, which was introduced in 2018 and is a precision AR-10 pattern rifle chambered in 7.62x51mm or .260 Remington. The 400 grenade launchers will likely be the compact LP40, a 40x46mm standalone launcher, which weighs 1.3kg, has a removable stock and a folding front pistol grip.

LP40 (Lebel)

It’s unclear which branch of the Ukrainian Armed forces the small arms will be destined for but they represent a substantial number, enough to equip a brigade or two. In terms of aid France has already provided a wide range of weapon systems and military equipment including self-propelled artillery, armoured personnel carriers, mines, anti-tank guided missiles, small arms, hand grenades and air defence systems. 

Support Us: If you enjoyed this video and article please consider supporting our work here. We have some great perks available for Patreon Supporters – including early access to custom stickers and early access to videos! Thank you for your support!

RPG Warheads with Fragmentation Sleeves

On 2 October, Ukraine’s 28th Mechanised Brigade posted a video on their social media showing an RPG team firing an RPG-7 during a firefight. The warheads being fired from the RPG-7 were all outfitted with homemade fragmentation sleeves.

A fragmentation sleeve fits over a warhead and breaks apart when the warhead detonates. The explosion spreads the fragments increasing the warheads anti-personnel effect. The sleeve seen in the video appears to be made from a sheet of rolled metal with a base ring. Their design and construction appears to be quite uniform and similar examples of the fragmentation sleeves have been seen on several earlier occasions. The sheet appears to be several millimetres thick with a grid of cuts creating weaknesses for along which the metal can fragment.

PG-7 warheads with uniform fragmentation sleeves, in a video posted by the 28th Mechanised Brigade (Ukrainian Army)

Back in April a photograph featuring similar sleeves was shared, one PG-7 warhead has a sleeve running between the venturi/rocket nozzles and the base of warhead’s shaped charge while the other appears to have a sleeve which is wrapped around the lower part of the warhead. The venturi of this warhead isn’t visible.

[Correction/Update – 11/11/23: The rocket is in fact a PG-9/16 which is fired from SPG-9 recoilless guns. This suggests that fragmentation sleeves are also in use with the widely used SPG-9. See image below. – Thank you to Michael Crenshaw for his help IDing this munition.]

Top: PG-9/16 with frag sleeve Bottom: PG-7 with frag sleeve (via social media)

A Ukrainian combatant shared a short video featuring a PG-7 warhead with a fragmentation sleeve on 4 May. On 21 June, Ukrainian news outlet Новинарня published a video report featuring the 67th Mechanised Brigade in action near Kreminna. Members of the brigade’s 2nd mechanised battalion are seen with numerous PG-7s with fragmentation sleeves in the report. One Ukrainian combatant is seen preparing them for launch, attaching boosters to the rockets.

It would appear that the design of the sleeves has been shared between a number of fabricators as they have appeared in a number of areas and appear to a fairly standardised design. Images from the summer of 2023 show the sleeves added to a variety of different PG-7 warheads including a crate of six PG-7VLs.

A number of PG-7V with frag sleeves (via social media)

In August, a Ukrainian individual made a call on social media for fabricators to produce base rings for sleeves. The post included a photograph of six PG-7M warheads with fragmentation sleeves.

The October video posted by the 28th Mechanised Brigade shows the rockets being fired at unseen targets in the distance. The RPG-gunner appears to be using the tactic of using the warhead’s maximum range self-destruct feature to detonate the warheads above Russian positions.

The warheads are fitted point-initiating base detonating fuzes which contain a pyrotechnic-based self-destruct mechanism which causes the warhead to detonate at its maximum range of approximately 950 metres. When the warhead detonates at the end of its flight it will shower what is below it with fragments from both the warhead and the fragmentation sleeve.

A crate of 6 PG-7VLs with slightly rusty frag sleeves (via social media)

On 30 September, a PG-7 with a fragmentation sleeve was seen at the beginning of a video shared by the ‘Omega’, the Special Purpose Center of Ukraine’s National Guard. The characteristic shape of a sleved warhead can be seen just before a member of ‘Omega’ fired the RPG-7.

On 4 October, a Ukrainian combatant shared a photograph of a PG-7VL warhead with a fragmentation sleeve. The photo was shared in response to the earlier August photograph. This example, however, appears to be made from a mosaic of small metal squares rather than from a scored sheet of metal.

An RPG-7 with a fragmentation sleeve, 67th Mechanised Brigade (Новинарня)

In terms of effectiveness the sleeves probably do not fragment uniformly along the cuts in the outer surface. However, the fragmentation effect of the sleeve is probably good enough for it’s intended purpose. It also remains unclear if the added mass and likely shifting of the warheads’ centre of gravity negatively effects its range and accuracy.

Fragmentation sleeves are definitely not a new innovation but they are a simple adaptation which can be made to PG-7 pattern warheads, which are predominantly designed for anti-armour roles, to improve their effectiveness against enemy personnel. While there are a number of warheads designed specifically for use against personnel these may not be as commonly available and as a result the Ukrainians have taken to improvising. We have already seen makeshift anti-personnel warheads made from fire extinguishers packed with explosive and the practice of simply taping shrapnel to the sides of standard PG-7 warheads.

06/11/23 – Update: An additional video featuring a PG-7VL warhead with a frag sleeve being used to tamp down a sandbag.

Update – 14/12/23: A video showing manufacture of various patterns of drone munitions was shown in a video posted by Ukrainian combatants. In it a munition with frag sleeve is seen.

Update – 15/1/24: Video dating from Spring 2023 shows members of the 28th Mechanised Brigade operating what appears to be a fragmentation sleeve (or perhaps an improvised warhead) being fired from m RPG-7.

Update – 25/03/24: A look at how some of the frag sleeves may be manufactured.

Update – 6/6/24: Some examples of well made, finely machined Ukrainian fragmentation sleeves.

The sleeves seen in the post above were sold by a company called ‘FixeStop‘ and are euphemistically marketed as ‘Men’s metal massage rollers: – for feet; – for legs’. Various sises between 100mm and 200mm of various weights are offered at prices ranging between 300 to 950 UAH.

Update – 16/7/24: An improvised drone dropped munition with a 3D printed tail tube and cone with a frag sleeve.

Thank you to Ukraine Weapons Warfare, AFV Recognition, AbraxasSpa and Weapons Illustrated for their help tracking down some of the imagery used in this article/video.

Support Us: If you enjoyed this video and article please consider supporting our work here. We have some great perks available for Patreon Supporters – including early access to custom stickers and early access to videos! Thank you for your support!

More Russian & Ukrainian MT-LB Adaptations

In June we looked at MT-LB adaptations which have been pressed into service by both sides. Check out that video/article here. In recent weeks there have been more sightings of some of these adapted vehicles.

On 3 September, the first video of one of Russia’s MT-LBs fitted with a 2M-3 twin 25mm naval gun turret was shared online. The turret appears to be extremely unstable, shaking violently, its hard to imagine this weapon system being useful for anything beyond suppression.

A Russian MT-LB mounted with a 2M-3 turret (via IZ)

A week later on 10 September a short clip of another Russian MT-LB with a 2M-3 turret was published by Russian news outlet Izvestia. Again the turret seen firing appears to be very unstable with not only the vehicle rocking on its suspension but also the turret bouncing in its mount.

Intriguingly both of these MT-LBs appear to have the 2M-3 turrets mounted much lower than the vehicles seen earlier. The MT-LBs seen earlier appear to have the turrets mounted higher in tower-like structures.

An S-60 MT-LB during an exercise in Russia (via social media)

Another adaptation not covered in our earlier video/article is the mounting of 57mm S-60 anti-aircraft guns on MT-LBs. These have been seen somewhat regularly and most recently shared via Russian telegram channels shared video of S-60-armed MT-LB training with a newly mobilised, but unnamed, unit in Russia’s central military district. These vehicles typically provide direct fire support against ground targets.

An MT-LBu fitted with a 14.5mm KPVT in a RWS (via 42nd Separate Mechanised Brigade)

In terms of Ukrainian adaptations there have been further sightings of one of the vehicles we looked at last time, an MT-LBu variant which has been upgraded with additional armour and a remote weapon station mounting a 14.5mm KPVT heavy machine gun. These are believed to be in service with the 42nd Separate Mechanised Brigade and some sources have described them using the designation BMP-1LB.

A video showing several of the adapted MT-LBus was shared on 7 September, showing four of the vehicles. On 13 September the 42nd Separate Mechanised Brigade shared a series of photographs featuring the vehicles. There hasn’t yet been any video of these vehicle’s remote weapon stations being fired so it is unclear if they have been stabilised better than their Russian counterparts.

MT-LB with a BM-7 Parus turret (via social media)

One adaptation which was not mentioned in our earlier video/article was the combining of an MT-LB with a BM-7 ‘Parus’ weapon module. The BM-7 normally comprises a 30mm ZTM-1 auto cannon, a coaxial PKT machine gun, a 30mm automatic grenade launcher and several anti-tank guided missiles. These are typically paired with the BTR-4. MT-LBs mounted with the BM-7 don’t appear to have the ATGMs fitted. These MT-LBs were first seen in July, with a video of two of the vehicles on the move shared on 21 July. Another video showing one of the vehicles firing has also been shared.

The ubiquitous MT-LB, while lightly armoured, continues to offer one of the best available platforms adaptation, if you enjoyed this article/video – check out our earlier work on MT-LB adaptations here.

Update 11/7/24:

Russian marines of the 155th Guards Brigade operate an MT-LB with a 2M-3M twin mount.

Support Us: If you enjoyed this video and article please consider supporting our work here. We have some great perks available for Patreon Supporters – including early access to custom stickers and early access to videos! Thank you for your support!

Does the L403A1 Mount a Bayonet?

In a recent article/video we looked at the UK’s newly selected Alternative Individual Weapon system, the L403A1. The Knight’s Armament KS-1 was selected as the new rifle for the Ranger Regiments of the Army Special Operations Brigade and for elements of the Royal Marines Commandos.

One question which frequently appeared in the comments was “can it fit a bayonet?” This is a good question because the British Army is known to be a proponent of bayonet use with a long history of using it to great effect from the 1600s right through to recent conflicts in Iraq and Afghanistan.

Surveillance and Reconnaissance Squadron member with new L403A1 (Royal Marines Commandos)

The short answer to the question is – yes. The longer answer is a bit more complex. Just a week after the selection of the new rifle was announced Knights Armament displayed one of the rifles with a bayonet fixed at the DSEI 2023 exposition in London. This naturally caught some attention.

L403A1/KS-1 with a bayonet seen as DSEI 2023 (via social media)

However, when the selection of the L403A1 was initially announced a breakdown of the Alternative Individual Weapon system’s accessories and ancillaries was released. This included: a Vortex 1-10x LVPO, an Aimpoint ACRO and a QDC/MCQ-PRT [Quick Detach Coupling/Mini Close Quarters–Pressure Reduction Technology] suppressor along with a sling, a vertical front grip, and a Surefire weapon light but noticeably it did not include a bayonet.

Breakdown of the parts and accessories adopted with the L403A1 (Edgar Brothers)

The ability to fix a bayonet was not part of the weapon’s original requirements and it was not stipulated by the Rangers or Commandos. Instead, Knight’s Armament developed the capability themselves, perhaps recognising the UK’s fondness for the bayonet and the British Army’s long history of its use as both a training aid and as a weapon of war.

KAC’s 1st bayonet design with QDC attachment mechanism (courtesy of Gregory Knowles)

TAB reached out to Knight’s Armament about the bayonet and they confirmed that “the bayonet was designed in anticipation of a potential need, though not required as part of the contract.” The bayonet seen fixed to the rifle at DSEI was apparently the first iteration of the design which according to Knight’s Armament “used the same mounting mechanism as the suppressors” but a new “revised design uses an attachment mechanism that is more similar to the SA-80 bayonet attachment/retention design.”

Essentially, rather than using the suppressor’s ‘Quick Detach Coupling’ system the newer iteration of the bayonet uses a pivoting catch. The quick-detach method used by the suppressor involves the suppressor being rolled one way until the index pin seats in a notch before tightening it by twisting it the other direction.

Photos of 2nd bayonet design (Knight’s Armament Company)

The new iteration of the bayonet fits over the rifle’s 3-prong QDC muzzle device and uses the same style of catch system as the SA80. Knight’s Armament explained that “the redesign was a refinement of an initial concept after some basic testing and feasibility evaluation.” The bayonet haven’t undergone any serious testing as they’re still in the development phase. A chromed version of the latest iteration of the bayonet was also displayed at DSEI and has a removable pommel piece that can act as a small storage space and makes the bayonet more comfortable for use as a knife.

The bayonet’s blade is offset to the left side with a corresponding hole which lines up with the muzzle.

While bayonets aren’t currently planned to be issued with the rifles, the requirement might develop once they enter service. If, in the future, the UK Ministry of Defence requested a bayonet for the new rifles it seems that Knight’s Armament could be able to oblige.

French FR2 Sniper Rifles in Ukraine

On 5 October, a combatant in Ukraine shared photograph of himself with a French FR F2 sniper rifle. The 7.62x51mm rifles have only been sighted in theatre once before in March 2022, when a single F2 was seen. The origins of that rifle are unclear as no further rifles were subsequently seen. The rifle may have been acquired as surplus or another potential origin for the rifle is as aid from either Estonia or Lithuania who previously issued the rifle.

Most recently, on 5 October, Ukrainian outlet Tysk shared three photographs, provided by one of their subscribers, featuring another FR F2. The photographs featured a rifle and a SAGEM Sword Sniper 3-in-1 optic (a telescopic sight, thermal weapon sight, and laser rangefinder) which is part of the FELIN System. The presence of the SAGEM Sword optics may suggest that France have provided a batch of the rifles and accompanying optics.

The rifle appears to be mounted with a SCROME J8 scope which the rifle is typically paired with in French service. The FR F2 is being replaced in French service by the FN SCAR-H PR which may mean that France can pass on its surplus F2s to Ukraine.

It remains to be seen if further examples of the FR F2s will be seen. If a substantial number have been transferred by France then further examples will likely be sighted in the future.

France has also transferred a considerable number of armoured vehicles and a unknown quantity of general purpose machine guns including AANF1s and FN MAGs. Most recently, on 13 September, a FAMAS with the Valorisé upgrade, which adds rails, was seen in a range video posted by a Ukrainian combatant. There has been no further sightings of FAMAS in theatre to date. Individual sightings can’t be considered representative of wider use or considerable transfers of weapons until further examples are seen in theatre.

Update – 1/12/23: The French Assemblee Nationale has published a document which outlines the equipment, but not quantities, provided to Ukraine by France. It confirms the provision of both FAMAS, various calibres of machine gun and precision rifles.

Update – 14/12/23:

Update – 10/3/24: The French government has released an updated document listing the equipment and some of the quantities provided to Ukraine. The document states that 30 ‘Fusil de precision’ (precision rifles) have been provided between 1 March, 2022 and 1 May, 2024.

Support Us: If you enjoyed this video and article please consider supporting our work here. We have some great perks available for Patreon Supporters – including early access to custom stickers and early access to videos! Thank you for your support!

Russian Pilots Fielding PP-2000s & PLK Pistols

On 29 September delegations from the defence departments of member states of the Russian-led Commonwealth of Independent States were shown around the JSC Instrument Design Bureau in Tula. During the tour Russia’s defence minister Sergei Shoigu demonstrated a PP-2000 submachine gun. Also present was Deputy Commander-in-Chief of the Aerospace Forces Yuri Grekhov who explained that the PP-2000 is now part of the emergency kit stored under Russian aircrew seats.

Grekhov’s statement confirms what has been anticipated for a while. Back in June, TASS reported that during the International Naval Show (IMMS-2023) Rostec/High-Precision Complexes (the parent company which offers the PP-2000) had confirmed that the weapon was “currently undergoing trials in the Aerospace Forces (VKS) of the Russian Federation.” This was confirmed by a post on Rostec’s website on 19 June.

A PP-2000 and a new PLK pistol at the range for testing (via FighterBomber)

The PP-2000 is a compact submachine gun, designed at the Instrument Design Bureau in Tula in the 1990s. The weapon is a conventional blowback which feeds from 20 or extended 44 round magazines which are loaded into the pistol grip. It is chambered in 9x19mm and can fire Russia’s standard 9mm ammunition or the armour piercing 7N21 and 7N31 rounds. It has a reciprocating charging handle which runs parallel over the barrel. It is characterised by its front grip which connects to the pistol grip to act as a large trigger guard. It can be fitted with a suppressor and has a side folding stock and a small length of rail on the top of the receiver for mounting optics. Other accessories such as lights or lasers can be attached to the base of the front grip. According to Rosoboronexport the weapon weighs 1.4kg (or just over 3lbs) unloaded and with the stock folded is 35cm (13.7in) in length.

Typically, aircrew have carried Makarov or Stechkin pistols but better equipping Russian pilots has long been a consideration with not all aircraft able to fit larger weapons such as rifle or carbines. This has reportedly been driven by experiences in Syria and more recently in Ukraine. During the battle of Hostomel airport in March 2022, a damaged KA-52 attack helicopter was forced to make an emergency landing. It’s crew were able to dismount and take up positions and await retrieval. They were armed with AK-74Ms, however, the confines of other Russian aircraft do not allow rifles to be carried.

PP-2000 (Rosoboronexport)

In a December 2019 interview with Lt.Gen. Nikolai Gostev, commander of the 4th Air and Air Defence Forces Army, Interfax asked if PP-2000s will be fielded. Gostev replied [machine translated]: “Currently, several promising samples of portable emergency supplies for flight personnel are being tested, which also include promising samples of small arms. The tests are carried out by specialists from the Gromov Flight Research Institute, and after their completion it will be decided which portable emergency supplies will be put into service.”

In May 2021, it was reported that Shoigu had directed the process for a compact personal defence weapon to be added to aircrew’s survival kits to be expedited. At the same time the PPK-20, from Kalashnikov Concern was also suggested as an option. Russian news reports noted that personal defence weapons would be added to the emergency kits aboard Su-27, Su-30SM, Su-35, Su-57, MiG-29 and MiG-35 as well as Su-24 and Su-34s.

Russian pilot demonstrating a PP-2000 during a Zvezda news report (Zvezda)

On 23 June 2023, during the failed Wagner advance on Moscow, General Sergey Surovikin, then Commander-in-Chief of the Russian Aerospace Forces, appeared in a video calling on Wagner to stand down. In his hand could be seen a PP-2000 outfitted with an optic, light and suppressor.

Surovikin with PP-2000 (Russian MoD)

In September 2022, the Fighterbomber telegram channel shared a post lobbying for the AM-17 rather than the PP-2000, rightly arguing a pistol calibre submachine gun is next to useless against combatants wearing body armour. Another major Russian telegram channel, Повёрнутые на Z войне, welcomed the wider issue of the PP-2000 in a post from late December 2022, sharing a photo of a PP-2000. The post also suggested that until then only Guards Aviation units had been issued them.

In January 2023, Fighterbomber began to report on the apparent testing of the PP-2000 and the PLK pistol, claiming that despite the order for three months testing positive reports from those involved had already been ordered.

A PP-2000 belonging to crew of a in an MI-8amtsh cargo helicopter, December 2022 (via @nrxnb)

In April 2023, Fighterbomber posted a review of the new PP-2000 and PLK. The post described the PLK as “a great gun. Powerful, comfortable and precise.” Praise for the PP-2000 was less forthcoming with the post noting: “PP-2000 is still jamming every now and then… still need 44-round magazines and a 7N31 cartridge for the PP.”

A new PLK pistol (via FighterBomber)

On 2 October, following Shoigu and Grekhov’s comments at Tula, Zvezda published a short report from a survival training centre. During the clip an Su-30SM pilot explains that “particular attention was paid to tactical shooting, survival in extreme conditions and tactical medicine.” The video shows pilots training in escape and evasion skills and sees them deploy their new PP-2000s. The video concludes with the two air crew firing both the PP-2000 and the PLK at the range.

The PLK pistols, from Kalashnikov Concern, are the latest iteration of the Lebedev pistol introduced in 2015 as the PL-14. The PLK was reportedly adopted by Russia’s Ministry of Internal Affairs in October 2021 but sightings with Russian pilots are the first sightings of regular Russian military use. If more of the PLKs appear in use they’ll be a topic for a future article/video.

Support Us: If you enjoyed this video and article please consider supporting our work here. We have some great perks available for Patreon Supporters – including early access to custom stickers and early access to videos! Thank you for your support!

Bibliography

PP-2000, Rosoboronexport, (source)

Other sources linked in text

FN Light Automatic Rifle ‘Competition Model’ Manual

In this short video we’ll take a look at a manual for the FN Light Automatic Rifle ‘Competition Model’. The FN LAR was a semi-automatic only commercial export variant of the FAL. This undated manual likely dates from the 1980s when FN began importing LAR’s into the US.

This week is FAL week over at History of Weapons & Warfare, with videos looking at the FAL from all of the creators being featured. Until Sunday, 8 October, you can get 25% off your first month when you use the discount code ‘L1A1‘! Head over and check out – www.weaponsandwar.tv

Front cover of the LAR manual (Matthew Moss)
Centre-fold of the LAR manual showing the disassembly process (Matthew Moss)

More Manuals from the TAB Reference Collection:

Support Us: If you enjoyed this video and article please consider supporting our work here. We have some great perks available for Patreon Supporters – including early access to custom stickers and early access to videos! Thank you for your support!

Heavy Drone Bombers Dropping Anti-Tank Mines

Drone warfare in Ukraine is one of the war’s most rapidly evolving elements with considerable innovation and improvisation. In recent weeks several videos have been shared showing large drones dropping TM-62 anti-tank mines.

The first video shared on 3 September showed how a mine could be carried and released by a large six-rotor drone. The TM-62M is seen loaded into a cradle tray which is then remotely triggered causing the floor plate to hinge and release the mine. The video also shows how the TM-62 is fuzed with a UZRG-pattern hand grenade fuze, pushed directly into the mine’s explosive through a hole cut in the side of its casing.

The TM-62M is a high-explosive blast landmine designed to immobilise or destroy vehicles. The mine is packed with 7.5kg (17lbs) of explosive and is normally centrally fuzed by a pressure fuze. The TM-62M is a significant payload for a bomber drone and when dropped they have significant blast effect.

A subsequent video, shared on 6 September, shows a series of clips filmed by the bomber drone’s camera showing the TM-62 being dropped on numerous targets. The mines in this video have been significantly adapted with a stabilising tail added. The tail appears to be made up of a length of PVC pipe and a large water battle with its base cut off. The tail appears to be quite effective especially given the mine’s considerable weight and poor aerodynamics. It is also notable that the fuzing system appears to be different in the second video. Rather than a hand grenade fuze it appears that a larger fuze has been used, positioned next to the stabilising tail.

With the tail and its cut down water bottle its unlikely the release system for this munition is the same as that seen in the first video. A system which would allow for a smooth release and not snag the tail assembly would be needed. In several of the clips in the second video a strap swings past the drone’s camera perhaps suggesting there is a sling system in use.

A subsequent photograph shared on social media shows one of the mines in much better resolution. The tail is indeed made from PVC piping and a water bottle and the fuze appears to be vane-armed. The makers also have a sense of humour likening the odd-looking munition to the ‘USS Enterprise’ from Star Trek, they’ve written ‘USS Enterprise NCC-0001’ on the forward section of the mine.

At the same time as the photograph a number of additional videos showing the TM-62 based bombs being dropped were shared. These videos were originally shared towards the end of August and show a series of successful munition drops.

We are seeing a trend towards more sophisticated and more capable drone bombers which can carry either greater numbers of smaller bombs or larger singular bombs like the TM-62 munition.

Update – 1/10/23

The K-2 drone team with the 54th Brigade has shared footage of one of their drones dropping TM-62s mines on a Russian checkpoint and storage position. The drone appears to drop several unadapted TM-62s, though the lag time between landing and detonation would indicate they are not equipped with an impact fuze but perhaps a grenade fuze as seen in the initial videos featuring TM-62s. The resolution of the thermal cameras does not make it possible to identify the method of fuzing.

Note the falling TM-62 (with tape) and the swinging drop tray (K-2)

The release system appears to consist of a tray which holds the mine which is suspended by straps which are released to drop the munition. The tray can be seen swinging beneath the drone after one of the drops. The munitions appear to have tape around them, the reason for this is unclear, perhaps protecting the fuze system.

Update – 5/1/24: A video compilation showing numerous drops of TM-62s was shared on 5 January 2024. It begins with a demonstration of a light weight drop tray being released. The tray appears to be made from a metal grill (perhaps from an oven or an animal cage). The compilation shows mines being dropped without tail assemblies like those seen in earlier videos. Their are also visible puffs of gases/smoke from the mine’s fuze being triggered as it descends.

Update – 11/1/24:

Update -17/1/24: Further footage of TM-62 pattern mines being dropped from drones. Note a tail stabiliser is not used.

Support Us: If you enjoyed this video and article please consider supporting our work here. We have some great perks available for Patreon Supporters – including early access to custom stickers and early access to videos! Thank you for your support!

Bibliography:

TM-62M Landmine, CAT-UXO, (source)

Fuzes, CAT-UXO, (source)